Tuesday, April 26, 2011

Motorcycle Watercolor - Part 3

Alright, so this is where the fun part begins...

First off before you start the inking process, you'll want to make sure the pencil lines on the paper are pretty light. Otherwise, when you begin tracing over them with the ink pens, the pen tips may get clogged with graphite and need to be taken apart and cleaned (if you use the fancy kind), if you're like me and use the disposable pens, you'll end up having to throw them out if they get clogged.

So first thing is to take a white vinyl eraser and lightly erase the lines, just to the point of still being visible enough to trace.


Once the initial erasing is done, you can start to ink. I'm doing this freehanded but if you want to, you could use French Curves or Shippens Curves, which are very easy to use and very affordable. Also, it's important to start with a pen that has a small tip. For this illustration I'm using a Staedtler .03 india ink pen. The reason that you start with the small pen is because with inking you can always add more ink to thicken a line, but you can't take away to make a line thinner. Since I'm using watercolors too, which are very transparent and don't cover the picture plane like oils or acrylics, you have to be very mindful of this as you won't be able to paint over the lines later. (This is actually an advantage, you'll see why in the next part of the tutorial)


So in the above picture you can see that the lines I've added around the rider are pretty defined and solid. This is because the rider is in the foreground, also, he and his bike are the main subject matter. In the picture below the background objects are drawn very loosely to convey the idea of distance and to attempt to show that the rider is in motion.


Below is another example of the same concept. Drawing background objects a bit looser to convey distance and that they would be "out of focus" being so far away.


In the middle ground, between the background and foreground, the objects start out less defined as they are further back into the picture, but become more pronounced as they come forward. Look at the lines in the road for example. They are small and insignificant towards the back (the dividing line in the road behind the rider) but become more defined as they come forward (the two remnants of a dividing line to the right of the rider).


Now take a look at the spokes. They are a little bit of a problem that a lot of people would solve differently. The problem is that they are in the foreground, so they should be in focus, but since they are in motion, they should also be out of focus. Tricky, tricky...
What I've done is drawn the base of the spokes closest to the center of the wheels. As they move outwards to the tire they appear to be blurred more, so with a small "whip" of the pen tip, you can create a line that begins solid enough and quickly tapers to nothing. It works very well to go from a defined area to an obscured area in a short distance.


Does this motorcycle look funny to you? Where's the motor? The top tree on the fork?
It's all there, but if you look back at the photo from parts one and two that a lot of the motorcycle is black from the shadows that the machinery creates. So instead of driving yourself crazy, just trace the blocks of color, this will make it look like a "paint by number" but trust me, you'll love it. One thing to remember (and this is just my way of doing it, so if you ever meet a real painter, don't hesitate to listen to them too) is that areas that are highlights should be traced a little larger than the highlighted area. The reason being because when you go to paint with the watercolors, you'll want to try and match the transition from black to white (like on the exhaust pipes for instance) and that gradation, or "fade" will require that the line not be shown too much. You can certainly leave the pen showing when you're painting and not worry about it, or try to fade the shadows into the highlights and cover the lines as you find fit. No wrong way to do this, just fun to try different things :)


After all that, defining shapes and being aware of line thicknesses, solid or loose lines for depth and all the other fun stuff that goes into the drawing with ink, this is really the fruits of you labor. After the ink has dried, which should only take a few minutes from the last place you put you pen tip, you get to take the handy dandy white eraser again and clean up the whole drawing. Erase everything on the entire page and VOILA! All the pencil lines and smudges will be gone and you'll have a very dramatic little pen and ink drawing on a stark white piece of paper. Really fun to do the first time around :)

If you'll notice that I didn't ink the shadow underneath of the bike, that's because I plan on using it to paint over and keep the blurry quality of the shadow intact. This technique can also be used for highlights as well, but when you paint, remember that the water from the paint may wash out some of the leftover pencil lines as well.



Isn't it cool?! Very good, and now the really super awesome part! PAINTING!
One difference from this painting and the others in the motorcycle series is that this was done on watercolor paper and the other ten paintings were done using illustration board. The change in media should make for small adjustments but an interesting challenge as well :)

Enjoy!

Sunday, April 24, 2011

Dear Sir Isaac Newton...

I have defeated your so-called "gravity"...

Regards,
Kyle Yarrington

P.S. Happy Easter :)

Wednesday, April 20, 2011

Motorcycle Watercolor - Part Deux (2)

So today I'm tracing the images and transferring them to the watercolor paper. Now that the stencils are made from the print out and taped onto the paper, this is a breeze.

You can begin wherever you like, but I usually start out with the important parts of the painting. The subject matter in the foreground is the rider and his motorcycle. These are the time consuming parts, but also the most interesting, so be careful. Try to stick to tracing the shapes or "blocks" of color, and a few contour lines here and there will give you good reference points for later. Also, you don't have to press very hard when tracing, so try not to poke through the paper. (NOTE: If you used charcoal or very soft graphite (3B-8B) on the back of the printed image as the transfer material, you don't have to press very hard at all with the pencil. If you used something harder (graphite from 8H-B) then a little more pressure will be needed.)



Now that the bike and the rider are all traced, look over it quickly and make sure that nothing was missed. If you need to retrace anything, now is the time to do it, if not, scan the background and look at the objects.


Softly, scribble underneath the bike to add in the cast shadow.


The road lines in the foreground are in focus with the rider, so try to match the shape accurately without drawing too much attention to it. A little looseness will be good in this area to keep the attention on the rider and keep the viewer's eye from wandering too much.


Notice how everything is blurred? The rider is in motion in this picture, so you need to trace the objects in the background loosely. It'll give you a good head start when trying to paint a blurred background. When tracing the background, it doesn't have to be perfect, just enough to get the basic shapes out of it.


Now that you're done tracing, try to peel back the tape at a fairly sharp angle, while pulling out to the side. This will give you a chance to minimize ripping or tearing the paper and will also preserve the printed image should you need to start over with a new stencil.


Once you have the printed image removed from the paper, take a look at your transfer. The basic shapes are all outlined and there are a few contour lines to give you an idea of the depth of objects and the placement of shadows throughout. Also, if you missed an area here or there like I did (the handlebars, and the back wheel), this is an easy fix. Choose two objects close to the edge of the printed image and try to line them up with the traced image. Be careful as this can be kind of a pain to undo if you're a little off, but once the images are aligned again, just retrace the areas you missed :)



That's all for now. I'm going to go back and trace the other two stencils from the previous post.
Next will be the inking process, which is fairly easy and along the same lines as the transferring steps in this post. The big difference is that the inking process allows you to start being creative :)

Rebel!

As an art student, I feel it is my sworn duty (if only to myself) to not only do a good job in school learning the ways of traditional art, but also to practice new forms of art and to try and allow myself to progress based on curiosity and experimentation as well as in practice.

That being said, skateboards, motorcycles, cars, and silly little comic books are not the newest forms of media, but I enjoy them. The skateboard that I'm currently working on is a Bomber from the Bozi lineup of a few short years ago. I stained racing stripes on the top and outlined them in black acrylic paint. I'M OPEN TO SUGGESTIONS ON THE BOTTOM GRAPHIC! I'm blanking out here. Haha :)

That's all, here's a pic of the top of the board

Monday, April 18, 2011

Sunday, April 17, 2011

Motorcycle Watercolor - Part 1

I have three pictures that I'm going to paint and send out to California :)

The easiest and fastest way of doing this with watercolors is to make a transfer, it works the same as Carbon Paper.

Here's the images printed off on standard printer paper, 8.5"x11".


Next, I'll scribble all over the back with a soft graphite pencil. When I trace the image from the front, the graphite leaves the transfer and sticks to the watercolor paper, leaving a light tracing for me to work with.


After the scribbling, tape the image to the watercolor paper with the lowest tack tape possible. Most art stores sell drafting tape which is very low tack (stick it to a piece of tissue paper and peel it off, and the paper won't rip). The blue tape I'm using here is "Delicate Surfaces" Painter's Tape. It's a larger roll, with a little more adhesion, but not enough to tear the paper, and it was cheaper :)


So there's the first step. The transfers have all been taped tot he watercolor paper and are ready to be traced. The tracing is fairly tedious and time consuming, so if you're trying this, prepare to be slightly annoyed lol


Once the tracing is done, the ink pens can be used to trace thick lines directly onto the watercolor paper, or you can jump straight into the painting! YEAH! ART IS AWESOME!!

ahem... airplane ride got postponed again, btw, there were some very strong winds this morning left over from a storm that had passed through late last night... LAME, try again next weekend.


Friday, April 15, 2011

In Case You Noticed...

I'm also going to make the blog look a little more fancy :)

Hence the white, and a snazzy new logo coming soon, tee hee

Sometimes I Cheat with Painting

Tonight I wanted to start three new watercolor paintings for a bike builder in California. The way that I had done this before was by using a photograph and printing it onto 8.5"x 11" paper, scribbling on the back with charcoal or graphite, then tracing the image (drawing directly onto the printed image) and lifting it off the illustration board. This would transfer dry media from the printed photo to the illustration board and made it very easy for me to ink the picture and begin painting watercolors in, with only an hour or two spent tracing.

Unfortunately the printer ran out of color ink and only printed black... LAME... So I ventured to the local ink store and got the toner cartridges for a solid $40. I also picked up deodorant for the little brother, so if he smells nicer next time you see him, think of me.

I ran home and tried printing out the photograph again to make a transfer and much to my delight, the black ink cartridge ran out... SOOOOOOOO LAAAAAAAME...

I'll be making another run to the store tomorrow for more ink and will most likely be taking some pictures along the way to show the process :)

Also, it looks like this Saturday is going to be rainy and foggy, so I probably won't be flying a plane tomorrow. I'll have to call the airpark and reschedule for Sunday. This weekend is going to be interesting to say the least.

Monday, April 11, 2011

On a Side Note

I have been kinda curious about planes lately, and found out about a place where you can get a short "Test Flight" with an instructor. After the weather was not so friendly this past weekend, I called the airpark for the third day in a row and scheduled a flight for 8:00 am Saturday morning.

Clouds be damned, I WILL be flying an airplane this weekend!

This Week...


A few things have happened in the past week or so.

1. The Land Cruiser is finally road worthy again (mostly), thanks to Dad, who knows how to fix monster trucks and make them do cool things, you know, like steer :)


2. The SV got a shiny new tire on the front today. I gave the wheel and tire to my friend Eddie who mounted it for me, so he'll be receiving a chocolate cake from the sister person and probably some artwork from me.


3. Started doing some tattoo flash for a friend, here's the first drawing of a Tiger Lily. I may do a few more in different styles and see which is best, then colorize them in the shop of photo.


This week is starting off on the right foot I think, a few minor tasks getting done and exciting me for the next few days and this weekend especially. Nothing fancy this weekend, just loving the bikes and arts.

I have three watercolor paintings to start this week too. They'll be something a little more time consuming and special, but well worth the effort. They'll be going out to California when they're done, and hopefully making a few people pretty pleased with themselves :)

Enjoy!